首頁 > 產品訊息 > 太陽能電池用導電漿
太陽能電池用導電漿

  • P型PERC背面鋁漿

  • 本產品為針對P型太陽能電池之應用進行開發之特殊性材料，適用於PERC背面電極導電膠，具有優異的電氣特性、黏著強度佳、低翹曲等特性，並提供較寬的製程條件。
  • 聯絡我們
280系列

[產品特性 Product Features] 

1、高效率

 2、低翹曲

黏度  

15500±2500 cP [15.5±2.5 Pa.s]

Brookfield HBDV-II@ CPE-52 10rpm/1min, 25±0.2°C

流變 

具流變性，適用於網版印刷

外觀 

銀灰色



 

客製化服務

「誠心服務，以客為尊」，我們不僅重視銷售前的溝通，更堅信「客戶貨物到手，才是我們服務的開始」。


“We offer service sincerely for our customers, and we emphasize that customers are our top priority”. We not only pay attention to pre-sales communication, but also believe that it is the beginning of service while our goods reach to the customers.

 

高效率太陽能導電漿料

正面銀漿與SiNx反應性佳、導電率高，能提高太陽能電池轉換效率0.2%以上。

Front side silver paste: High conduction and good reaction to SiNx; the efficiency can be promoted about 0.2%.


背面鋁漿與矽結合性佳，產生均勻的背面電場，提高開路電壓及短路電流，效率與市售產品比較高0.1%。

Photovoltaic Aluminum paste: Result a uniform BSF and strong combination to Si-wafer; the Voc and Isc were increased so that the efficiency can be promoted about 0.1% than other same commercial products.



背面銀漿與上述兩種產品搭配性佳，與Ribbon的焊接力強，高於市售產品1N以上。

Rear side conductor silver paste:Good suitability with the above pastes; high combinative force with ribbon, which greater than other same commercial products.

 

完整的測試方法和設備

細度計 Fineness of Grind Gauges (FOG)

黏度計 Brookfield Viscometer

拉力測試  Tensile strength tester

熱重分析儀 Thermogravimetry Analysis (TGA)

電池 測試 Photoluminescence (PL)

模組 測試 Electroluminescence (EL) 

電池 效率測試 Solar Simulator IV Test (Burger)

掃描式電子顯微鏡 Scanning Electron Microscope (SEM)

模組層壓機 Solar Module Laminator 

環境測試 Environmental test chamber (Thermal Cycle)